The most impactful aspect of the changes in OS X Mountain Lion Server at first appears to be the fact that DNS looks totally different in the Server app than it did in Server Admin. برای شروع, most of the options are gone from the graphical interface and it looks a lot less complicated, meaning that there are indeed fewer options. با این حال, all of the options previously available are still there. و, the service behaves exactly as it did before, down to the automatically created host name when a server is configured and doesn’t have correctly configured forward and reverse DNS records that match the host name of the computer.
The DNS servicein OS X Mountain Lion Server, as with previous versions, is based on bind 9 (9.8.1 to be exact). This is very much compatible with practically every DNS server in the world, including those hosted on Windows, OS X, Linux and even Zoe-R.
For many, at installation OS X Mountain Lion Server will already be running the DNS service. This is because DNS wasn’t ready for the server when the Server app was first run. In order to protect itself from misconfiguration, the server then configures DNS to what it thinks is appropriate based on the initial setup assistant. While initially the service appears to only be running with the one record, several are actually created. The initial zone, a reverse zone, the NS record for the zone, the NS record for the reverse zone, the reverse record for the initially created zone, و غیره. To see all of this, open Server app and then click on the DNS service in the list of SERVICES. سپس, click on the cog wheel icon below the list of records and click on Show All Records.
Show All Records Option For DNS In Mountain Lion Server
Use the Edit button for Forward Servers to configure servers that DNS requests that aren’t resolvable by the local service for. مثلا, if you want your DNS service to look to 18.104.22.168 و 22.214.171.124 if it can’t find a record and then cache what it finds there, click Edit.
By default the “Perform lookups for” option is set to “only some clients”. Click the Edit button here to define what computers can perform DNS lookups through this server.
At the Perform Lookups screen, provide any additional subnets that should be used. If the server should be accessible by anyone anywhere, just set the “Perform lookups for” field at the DNS service screen to “all clients”.
All you have to do to start the DNS is click on the ON button (if it’s not already started, به این معنا که). There’s a chance that you won’t want all of the records that are by default entered into the service. But leave it for now, until we’ve covered what everything is. To list the various types of records:
- Primary Zone: The DNS “Domain”. مثلا, www.krypted.com would likely have a primary zone of krypted.com.
- Machine Record: An A record for a computer, or a record that tells DNS to resolve whatever name is indicated in the “machine” record to an IP address, whether the IP address is reachable or not.
- Name Server: NS record, indicates the authoritative DNS server for each zone. If you only have one DNS server then this should be the server itself.
- Reverse Zone: Zone that maps each name that IP addresses within the zone answer with. Reverse Zones are comprised of Reverse Mappings and each octal change in an IP scheme that has records mapped represents a new Reverse Zone.
- Reverse Mapping: PTR record, or a record that indicates the name that should respond for a given IP address. These are automatically created for the first IP address listed in a Machine Record.
- Alias Record: A CNAME, or a name that points to another name.
- Service Record: Records that can hold special types of data that describe where to look for services for a given zone. مثلا, iCal can leverage service records so that users can just type the username and password during the setup process.
- MX Record: Mail Exchanger, points to the IP address of the mail server for a given domain (aka Primary or Secondary Zone).
- Secondary Zone: A read only copy of a zone that is copied from the server where it’s a Primary Zone when created and routinely through what is known as a Zone Transfer.
Click on the Plus Sign To See A List of Record Types
When you click on the plus sign, you can create additional records. Double-clicking on records (including the Zones) brings up a screen to edit the record. The settings for a zone can be seen below.
Configuring Zones in Mountain Lion Server
These include the name for the zone. همانطور که می بینید, a zone was created with the hostname rather than the actual domain name. This is a problem if you wish to have multiple records in your domain that point to the same host name. Theoretically you could create a zone and a machine record for each host in the domain, but the right way to do things is probably going to be to create a zone for the domain name instead of the host name. So for the above zone, the entry should be pretendco.com rather than c.pretendco.com (the hostname of the computer). علاوه بر این, the TTL (or Time To Live) can be configured, which is referenced here as the “Zone data is valid for” field. If you will be making a lot of changes this value should be as low as possible (the minimum value here is 5 دقایق). Once changes are made, the TTL can be set for a larger number in order to reduce the amount of traffic hitting the server (DNS traffic is really light, so probably not a huge deal in most environments using a Mountain Lion Server as their DNS server). Check the box for “Allow zone transfers” if there will be other servers that use this server to lookup records.
علاوه بر این, if the zone is to be a secondary zone configured on another server, you can configure the frequency to perform zone transfers at this screen, how frequently to perform lookups when the primary name server isn’t responsive and when to stop bothering to try if the thing never actually ends up coming back online. Click on Done to commit any changes made, or to save a new record if you’re creating a new zone.
توجه داشته باشید: To make sure your zone name and TLD don’t conflict with data that already exists on the Internet, check here to make sure you’re not using a sponsored TLD.
Double-click on a Machine record next (or click plus to add one). اینجا, provide a hostname along with an IP address and indicate the Zone that the record lives in. The IP Addresses field seems to allow for multiple IPs, which is common in round robin DNS, or when one name points to multiple servers and lookups rotate amongst the servers. با این حال, it’s worth mentioning that when I configure multiple IP addresses, the last one in the list is the only one that gets fed to clients. از این رو, for now at least, you might want to stick with one IP address per name.
Note that the above screen has a match for the host name to the zone name, including the zone name. This is not to be done for manually created records. Enter the name of a record, such as www for the zone called, مثلا, krypted.com and not www.krypted.com in the Host Name record, or you will end up creating a host called www.krypted.com.krypted.com, which is likely not very desirable. Given that this wasn’t the default behavior back in Server Admin, I personally consider this something that will likely get fixed in the future. Click Done to commit the changes or create the new record.
بعد, let’s create a MX record for the domain. We’re going to stick with the c.pretendco.com subdomain as it provides us with a nice walled garden for our DNS. To create the MX for the domain, click on the plus sign at the list of records.
Select the appropriate zone in the Zone field (if you have multiple zones). Then type the name of the A record that you will be pointing mail to. به احتمال زیاد, this would be a machine record called simply mail, in this case for pretendco.com, so mail.pretendco.com. If you have multiple MX records, increment the priority number for the lower priority servers.
As a full example, let’s create a zone and some records from scratch. Let’s setup this zone for an Xsan metadata network, called krypted.xsan. سپس, let’s create our metadata controller record as starbuck.krypted.xsan to point to 10.0.0.2 and our backup metadata controller record as apollo.krypted.xsan which points to 10.0.0.3. اولین, click on the plus sign and select Add Primary Zone.
At the zone screen, enter the name krypted.xsan, check the box for Allow zone transfers (there will be a second server) and click on the Done button. Click on the plus sign and then click on Add Machine record.
At the New Machine Record screen, select krypted.xsan as the Zone and then enter starbuck as the Host Name and click on the plus sign for IP Addresses and type in 10.0.0.2. Click on Done to commit the changes.
Repeat the process for Apollo, entering apollo as the Host Name and 10.0.03 as the IP address. Click Done to create the record.
Setting Up Secondary Servers
Now let’s setup a secondary server by leveraging a secondary zone running on a second computer. On the second Mountain Lion Server running on the second server, click on the plus sign for the DNS service and select Add Secondary Zone.
At the Secondary Zone screen, enter krypted.xsan as the name of the zone and then the IP address of the DNS server hosting that domain in the Primary Servers field. Click Done and the initial zone transfer should begin once the DNS service is turned on (if it hasn’t already been enabled).
Managing DNS From The Command Line
اکنون, all of this is pretty straight forward. Create a zone, create some records inside the zone and you’re good to go. But there are a lot of times when DNS just needs a little more than what the Server app can do for you. مثلا, round robin DNS records, bind views, و غیره. از این رو, getting used to the command line is going to be pretty helpful for anyone with more than a handful of records. The first thing to know about the DNS command line in OS X Mountain Lion Server is to do everything possible using the serveradmin command. To start the service, use the start option:
sudo serveradmin start dns
To stop the service, use the stop option:
sudo serveradmin stop dns
To get the status of the service, including how many zones are being hosted, the last time it was started, the status at the moment, the version of bind (9.8.1 right now) and the location of the log files, use the fullstatus option:
sudo serveradmin fullstatus dns
A number of other tasks can be performed using the settings option. مثلا, to enable Bonjour Client Browsing, an option previously available in Server Admin, use the following command:
sudo serveradmin settings dns:isBonjourClientBrowsingEnabled = yes
Subnets can be created programmatically through serveradmin as well. Let’s look at what our krypted.xsan subnet looks like, by default (replace your zone name w/ krypted.xsan to see your output):
sudo serveradmin settings dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan
Which outputs the following:
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:allowZoneTransfer = yes
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:aliases = _empty_array
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:expire = 1209600
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:serial = 2012080505
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:allow-update = no
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:adminEmail = "[email protected]"
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:machines:_array_index:0:name = "starbuck.krypted.xsan."
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:machines:_array_index:0:ipAddresses:_array_index:0:ipAddress = "10.0.0.2"
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:machines:_array_index:1:name = "apollo.krypted.xsan."
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:machines:_array_index:1:ipAddresses:_array_index:0:ipAddress = "10.0.0.3"
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:nameservers:_array_index:0:name = "krypted.xsan"
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:nameservers:_array_index:0:value = "starbuck.krypted.xsan."
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:refresh = 3600
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:mailExchangers = _empty_array
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:reverseMappings = _empty_array
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:retry = 900
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:timeToLive = 86400
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:serviceRecords = _empty_array
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:bonjourRegistration = yes
dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:name = "krypted.xsan"
اکنون, let’s say we’d like to disable bonjour registration of just this zone, but leave it on for the others on the server:
sudo serveradmin settings dns:views:_array_id:com.apple.ServerAdmin.DNS.public:primaryZones:_array_id:krypted.xsan:bonjourRegistration = no
The entire block can be fed in for new zones, if you have a lot of them. Just remember to always make sure that the serial option for each zone is unique. Otherwise the zones will not work properly.
While serveradmin is the preferred way to edit zone data, it isn’t the only way. In /private/var/named are a collection of each zone the server is configured for. Secondary zones are flat and don’t have a lot of data in them, but primary zones contain all the information in the Server app and the serveradmin outputs. To see the contents of our test zone we created, let’s view the /var/named/db.krypted.xsan file (each file name is db. followed by the name of the zone):
The output of which is similar to the following (YMMV based on record composition):
krypted.xsan. 10800 IN SOA krypted.xsan. admin.krypted.xsan. (
2012080507 ; serial
3600 ; refresh (1 hour)
900 ; retry (15 minutes)
1209600 ; expire (2 weeks)
86400 ; minimum (1 day)
)10800 IN NS starbuck.krypted.xsan.
apollo.krypted.xsan. 10800 IN A 10.0.0.3
starbuck.krypted.xsan. 10800 IN A 10.0.0.2
Add another record into the bottom and stop/start DNS to immediately see the ramification of doing so. به طور کلی, DNS is one of those services that seems terribly complicated at first. But once you get used to it, I actually find manually editing zone files far faster and easier than messing around with the Server app or previously Server Admin. با این حال, I also find that occasionally, because the Server app can make changes in there that all my settings will vanish.
Troubleshooting is another place where the command line can be helpful. While logs can be found in the Server app, I prefer to watch log entries live as I perform lookups using the /Library/Logs/named.log file. برای این کار, run tail -f followed by the name of the file:
tail -f /Library/Logs/named.log
سرانجام, see HTTP://krypted.com/mac-os-x-server/os-x-server-forcing-dns-propagation for information on forcing DNS propagation if you are having issues with zone transfers.
Because DNS is one of the most critical aspects of getting your server or servers configured properly, set up the name of your server before you do anything else. Then the very first thing you should do when you open the Server app on your first server is configure DNS. The next thing you should do is test DNS. The first thing you should do on each subsequent server is check DNS. به طور کلی, the DNS service is very straight forward, once you get used to setting up records. There is a ton of flexibility around using the command line to manage the service as well; با این حال, be aware when you do so that you could end up loosing data if you aren’t careful not to make any changes in the Server app!
As for getting used to the changes with every new version of OS X, Daniel Graystone once said “She’ll adjust. She’s probably very confused by everything. It’s only natural.”